Hot heys

[Guillaume]

Bonjour

Savez vous s'il existe une liste de toutes les touches de raccourci des Panzer Campaigns.
Je cherche notamment un raccourci permettant de mettre une unité en mode "Save Mouvement Cost".

Merci !! :sourire:

[Gromit]

Moi, je cherche les 'cheat Codes' :Rire:...

[Tortue Agile]

Bonjour

Savez vous s'il existe une liste de toutes les touches de raccourci des Panzer Campaigns.
Je cherche notamment un raccourci permettant de mettre une unité en mode "Save Mouvement Cost".

Merci !! :sourire:

As-tu regardé dans le manuel... J'ai pas les jeux sous la main (chuis au boulot) mais il me semble qu'il y a une liste des racourcis quelque part dans la manuel (vers la fin)

[Arnaud]

je ne connais pas le raccourciclavier correspondant (s'il existe) mais le save movement cost c'est le bouton en forme de munition dans la barre de boutons.

[Guillaume]

je ne connais pas le raccourciclavier correspondant (s'il existe) mais le save movement cost c'est le bouton en forme de munition dans la barre de boutons.

Ah tiens oui.
J'avais jamais fais attention. :zinzin:

Merci Arnaud

[souricier-gris]

voila j'ai recuperer ca je sais plus trops ou

[Guillaume]

Merci :sourire:

[Tortue Agile]

La liste complete (ou presque):

Ctrl Key – toggle between Move Mode and Fire Mode.
Shift Key - display the on-map labels while this key is pressed.
Space Bar - display the Selection Dialog (useful in Full Screen mode).

F1 - invoke General Help (display this help file).
F2 – display Users Manual help file.
F3 – display Campaign Notes help file.
F4 – display Parameter Data values.

F5 – slow the speed of the A/I processing.
F6 – return A/I processing to normal speed.
F7 – increase the speed of the A/I processing.
F8 – put the A/I in the highest possible processing mode (use F6 to return to normal).

A - invokes the Air Mission Dialog.

B - move the selected units backward in the Hot Spot hex (Note: this only has a visible effect in the 3D graphics mode).
D - selected unit(s) will begin Digging In.
E - invokes the Artillery Dialog.
F - move the selected units forward in the Hot Spot hex (Note: this only has a visible effect in the 3D graphics mode).
G – toggle display of valid target hexes of selected units.
H – toggle display of maximum range of selected units.

I - activates the AI.
J - opens the Jump Map.
K - displays the modified Command Range from a selected HQ.
L - turn the selected units counterclockwise.
M – opens the Arrived Dialog.
N - advance the Hot Spot to the next stack of units that have not been active this phase. If you hold down the Alt key when invoking this function, it will advance the Hot Spot to the next unit that has not been active and select it. If you hold down the Ctrl key, it will advance the Hot Spot to the next unit that is capable of firing.

O - highlights the Organization for the selected unit. If an organization is currently selected and you hold down the Alt key when invoking this function, then the next higher organization is selected.
P – display the Organization Dialog.
Q – highlights HQ units on the map.
R - turn the selected units clockwise.
S - displays Visible hexes from the Hot Spot
T - toggles Travel Mode for selected unit(s)

U - undo the last movement (not available under Fog-of-War).
V - display Divisional Markings.
W – highlights Indirect Fire Spotters.
X - remove the selected units from the map.
Y – toggle display of Reachable Hexes.
Z - toggles the full screen map display on and off.

1 - display the map in Zoom-Out 2D mode.
2 - display the map in Normal 2D mode.
3 - display the map in Zoom-Out 3D mode.

4 - display the map in Normal 3D mode.
Normally the screen is recentered on the Hot Spot hex when you change zoom modes. If you hold down the Alt key when you change zoom modes, the screen will retain the current view.
Keypad 0 - change the formation of the selected units.
Keypad 1 - move the selected units down and to the left one hex.
Keypad 2 - move the selected units down one hex.
Keypad 3 - move the selected units down and to the right one hex.

Keypad 4 - turn the selected units counterclockwise.
Keypad 5 - turn the selected units about-face.
Keypad 6 - turn the selected units clockwise.
Keypad 7 - move the selected units up and to the left one hex.
Keypad 8 - move the selected units up one hex.
Keypad 9 - move the selected units up and to the right one hex.
Delete - move the selected units counterclockwise.
Page Down - move the selected units clockwise.

Home - move the selected units forward in the Hot Spot hex (Note: this only has a visible effect in the 3D graphics mode).
End - move the selected units backward in the Hot Spot hex (Note: this only has a visible effect in the 3D graphics mode).

[Guillaume]

Merci Tortue, je n'avais pas trouvé de telle liste sur la doc mais des bribes dans chaque descriptif d'update.
Donc en tout cas, pas de raccourci pour le "Save Mouvement Cost".

Pas grave.
Merci encore :sourire: